Designed to fit:
2020+ Porsche Cayman GT4/ GT4RS
2020+ Porsche Boxster Spyder/ Spyder RS
2021+ Porsche Cayman GTS (4.0)
2021+ Porsche Boxster GTS (4.0)
No more waiting for 4,000rpm for your exhaust valves to open up. This is controlled through factory PSE button.
PSE ON = Exhaust valves open 100% of the time
PSE OFF = Exhaust valves are always closed unless engine exceeds 4,000rpm (security feature)
Product description:
CARGRAPHIC Valve Control Unit - 2-Modes / Version for vacuum exhaust valves.
Controlled by factory center console PSE / tailpipe button.
Consisting of:
CARGRAPHIC control unit
Wiring loom to connect
Fits for:
Porsche 718 Boxster GTS 4.0 / Spyder
Porsche 718 Cayman GTS 4.0 / GT4
Porsche 718 Spyder RS
Porsche 718 Cayman GT4 RS
Export Version - Motorsport use only - No approval for use under road traffic regulations
Features:
Convenient and safe operation by factory switch (PSE / tailpipe button in center console)
Factory control remains connected
Quiet engine start possible* (see how it works)
Easy connection and installation
Traceless deinstallation
Get full control of your exhaust valves
Activation of factory valve control unit is always possible
Exhaust valve control unit - how it works:
The CARGRAPHIC valve control unit is installed between the exhaust valves and the factory control unit. The CARGRAPHIC valve control is activated by a combination of buttons in the interior. Subsequently, the 2 operation modes are selected by the PSE / tailpipe button in the center console:
The last selected mode is saved even after the engine is switched off and is executed when the engine is started again.
(*only GT4 and Spyder models - not available for GTS)
PERFORMANCE - Made in Germany
Attention:
Please advise if your vehicle is a left- (LHD) or a righthand drive (RHD) model.
Example pictures - Actual product may vary depending on model version.
Fitting notes:
Thanks to the original plug-and-play connectors, the valve control unit can be connected quickly. For safe and long-term operation, however, the control module & wiring must be mounted in a dry location, protected from heat and splashing water, and the wiring harness must be routed professionally. This requires sound knowledge of automotive electrics and the proper workshop equipment.
We therefore strongly recommend installation by a qualified specialist workshop. Self-installation may lead to malfunctions or vehicle damage and will void any warranty claims.
National and International Regulations and Requirements:
The CARGRAPHIC portfolio includes components that may be affected by national and international emissions regulations. CARGRAPHIC places great importance on providing accurate information about the compliance of our products with the respective regulations and clearly indicating whether they are approved exclusively for racetrack use or also for public road use. However, if there is no specific declaration regarding a product's intended use, CARGRAPHIC makes no assurance regarding its compliance. It is fundamentally the buyer's responsibility to select the appropriate product for the intended purpose and verify whether its use complies with local regulations and requirements. As regulations may change, we recommend regularly visiting our website to ensure the chosen product meets current legal requirements. Make sure that the product is installed according to the installation instructions and operated in compliance with all applicable local regulations.
Install Video: https://youtu.be/_mkcxNzM_X8
Click for install article here
Designed to fit:
2020+ Porsche Cayman GT4/ GT4RS
2020+ Porsche Boxster Spyder/ Spyder RS
2021+ Porsche Cayman GTS (4.0)
2021+ Porsche Boxster GTS (4.0)
No more waiting for 4,000rpm for your exhaust valves to open up. This is controlled through factory PSE button.
PSE ON = Exhaust valves open 100% of the time
PSE OFF = Exhaust valves are always closed unless engine exceeds 4,000rpm (security feature)
Product description:
CARGRAPHIC Valve Control Unit - 2-Modes / Version for vacuum exhaust valves.
Controlled by factory center console PSE / tailpipe button.
Consisting of:
CARGRAPHIC control unit
Wiring loom to connect
Fits for:
Porsche 718 Boxster GTS 4.0 / Spyder
Porsche 718 Cayman GTS 4.0 / GT4
Porsche 718 Spyder RS
Porsche 718 Cayman GT4 RS
Export Version - Motorsport use only - No approval for use under road traffic regulations
Features:
Convenient and safe operation by factory switch (PSE / tailpipe button in center console)
Factory control remains connected
Quiet engine start possible* (see how it works)
Easy connection and installation
Traceless deinstallation
Get full control of your exhaust valves
Activation of factory valve control unit is always possible
Exhaust valve control unit - how it works:
The CARGRAPHIC valve control unit is installed between the exhaust valves and the factory control unit. The CARGRAPHIC valve control is activated by a combination of buttons in the interior. Subsequently, the 2 operation modes are selected by the PSE / tailpipe button in the center console:
The last selected mode is saved even after the engine is switched off and is executed when the engine is started again.
(*only GT4 and Spyder models - not available for GTS)
PERFORMANCE - Made in Germany
Attention:
Please advise if your vehicle is a left- (LHD) or a righthand drive (RHD) model.
Example pictures - Actual product may vary depending on model version.
Fitting notes:
Thanks to the original plug-and-play connectors, the valve control unit can be connected quickly. For safe and long-term operation, however, the control module & wiring must be mounted in a dry location, protected from heat and splashing water, and the wiring harness must be routed professionally. This requires sound knowledge of automotive electrics and the proper workshop equipment.
We therefore strongly recommend installation by a qualified specialist workshop. Self-installation may lead to malfunctions or vehicle damage and will void any warranty claims.
National and International Regulations and Requirements:
The CARGRAPHIC portfolio includes components that may be affected by national and international emissions regulations. CARGRAPHIC places great importance on providing accurate information about the compliance of our products with the respective regulations and clearly indicating whether they are approved exclusively for racetrack use or also for public road use. However, if there is no specific declaration regarding a product's intended use, CARGRAPHIC makes no assurance regarding its compliance. It is fundamentally the buyer's responsibility to select the appropriate product for the intended purpose and verify whether its use complies with local regulations and requirements. As regulations may change, we recommend regularly visiting our website to ensure the chosen product meets current legal requirements. Make sure that the product is installed according to the installation instructions and operated in compliance with all applicable local regulations.
Install Video: https://youtu.be/_mkcxNzM_X8
Click for install article here
Image 1 of 11
Image 2 of 11
Image 3 of 11
Image 4 of 11
Image 5 of 11
Image 6 of 11
Image 7 of 11
Image 8 of 11
Image 9 of 11
Image 10 of 11
Image 11 of 11