The SOUL Performance Exhaust System is designed for Porsche 987.2 Boxster and Cayman owners who want a consistently aggressive naturally aspirated flat-six exhaust note without the complexity of a valved system. Developed as a lighter and simpler alternative to SOUL's Valved Exhaust System, the Performance Exhaust delivers its full exhaust character at all times while using high-quality mufflers to minimize unwanted drone and rasp.
SOUL developed the system to provide a substantial increase in exhaust volume over the factory system while maintaining the refined sound quality expected from a Porsche. Under throttle, the exhaust allows significantly more of the naturally aspirated flat-six character to come through. During cruising and partial-throttle driving, the mufflers are specifically designed to minimize objectionable cabin resonance.
The Performance Exhaust is particularly well suited for owners who want to pair a more aggressive rear exhaust with upgraded headers. SOUL designed the mufflers to remain effective at controlling undesirable drone and rasp even when the system is combined with freer-flowing aftermarket headers.
Compared with the SOUL Valved Exhaust System, this system eliminates exhaust valves and selectable sound modes altogether. The result is a straightforward, fixed exhaust configuration that delivers an aggressive exhaust note whenever the vehicle is running.
Fits 2009–2012 Porsche 987.2 Boxster, Boxster S, Cayman, Cayman S, Boxster Spyder, and Cayman R
Compatible with 2.9L and 3.4L naturally aspirated flat-six engines
Includes fitment for the 3.4L Boxster Spyder and Cayman R
Direct bolt-on replacement for the factory rear exhaust system
Fixed, non-valved exhaust design provides consistent exhaust sound at all times
Developed as a lighter and simpler alternative to SOUL's Valved Exhaust System
Produces substantially greater exhaust volume than the factory system while retaining a refined overall tone
Designed to provide greater volume than factory Porsche Sport Exhaust with the valves open
High-quality mufflers help minimize unwanted cabin drone and rasp
Designed to produce a fuller and more robust naturally aspirated flat-six exhaust note
Well suited for use with factory headers or upgraded aftermarket headers
Designed to remain controlled and usable even when paired with a more aggressive header configuration
Constructed from mandrel-bent T304L stainless steel tubing
Mufflers feature fortified casings designed for long-term durability
Reinforced exhaust brackets help prevent cracking and fatigue during extended street and track use
Each exhaust is rigorously quality-checked prior to shipment
Each system is fixture-tested to help ensure accurate fitment
New high-grade hardware for the header-to-exhaust flanges included
Detailed installation instructions included
Includes SOUL Straight-Cut Single-Wall exhaust tips in Signature Satin
Alternate SOUL tip styles and finishes are available by special request
Backed by SOUL Performance Products' Lifetime Warranty for both street and track use
The SOUL Performance Exhaust is a fixed, non-valved exhaust system.
Vehicles originally equipped with Porsche Sport Exhaust can use the SOUL Performance Exhaust, but the factory selectable exhaust-valve functionality is no longer used after installation. The SOUL system maintains its more aggressive exhaust character at all times rather than switching between quiet and loud modes.
For owners who want the ability to significantly reduce exhaust volume when desired, the SOUL Valved Exhaust System provides the more appropriate configuration.
SOUL developed the Performance Exhaust to deliver an invigorating flat-six exhaust note similar in character to the valves-open mode of its Valved Exhaust System, but without requiring valves or electronic control.
The system is noticeably louder than factory Porsche Sport Exhaust with the valves open while retaining mufflers specifically designed to minimize unwanted drone and rasp.
This makes the Performance Exhaust a strong choice for owners who want a consistently aggressive sound without making the vehicle unnecessarily harsh during cruising.
This DasMotoring listing includes SOUL Straight-Cut Single-Wall exhaust tips in Signature Satin.
To keep ordering simple, alternate tip finishes and styles are not offered through the standard product options. If you would like a different SOUL tip configuration, contact DasMotoring before ordering and we can confirm availability and pricing.
SOUL also offers alternate 321 stainless steel tip styles and finishes by special request. Titanium single-wall tips are also available and save nearly one pound compared with the stainless steel tips.
The SOUL Performance Exhaust uses a fixed, non-valved configuration for drivers who want a consistently aggressive exhaust note, reduced complexity, and strong exhaust flow.
The SOUL Valved Exhaust System adds controllable exhaust valves, allowing the driver to substantially reduce exhaust volume when desired while retaining an aggressive flat-six sound with the valves open.
For owners who want the car to sound aggressive at all times and do not need selectable exhaust modes, the Performance Exhaust provides the simpler solution. For frequent highway driving, early-morning use, or owners who want the ability to quiet the vehicle on demand, the Valved Exhaust provides greater flexibility.
This product is not CARB certified and may not be legal for use on emissions-controlled vehicles. SOUL identifies the system as intended for off-road use only.
Customers are responsible for ensuring compliance with all applicable local, state, and federal regulations before installation or use.
The SOUL Race Exhaust System is designed for Porsche 987.2 Boxster and Cayman owners who prioritize maximum sound, substantial weight reduction, durability, and track-focused performance. Developed specifically around the demands of aggressive driving, the system replaces the heavy factory rear exhaust with a lightweight architecture engineered to withstand sustained high-temperature and high-RPM use.
SOUL developed the system using free-flowing over-axle piping designed to maintain clearance around the axles and sway-bar end links, including on lowered or heavily modified vehicles. Rather than relying solely on conventional exhaust hangers welded directly to the piping, SOUL uses a purpose-built transmission-mounted support system designed to reduce stress and improve durability during demanding track use.
The forward exhaust piping attaches to a bespoke SOUL transmission mounting brace using heavy-duty Mikalor band clamps. Additional rubber vibration dampeners support the over-axle piping and help isolate movement and vibration throughout the exhaust assembly. SOUL's mounting system alone saves more than 5 lbs compared with the factory mounting hardware.
Weight reduction is one of the most significant benefits of the Race Exhaust. The complete SOUL system weighs approximately 27 lbs, compared with approximately 46 lbs for the factory exhaust components with mounting brackets, reducing vehicle weight by approximately 19 lbs / 8.6 kg.
This is an intentionally aggressive exhaust system. SOUL developed it primarily for track performance rather than maximum sound attenuation and specifically describes the system as very loud. Resonators help shape the exhaust note, but cabin drone will still be present. For owners prioritizing maximum naturally aspirated flat-six sound, reduced weight, and track-focused durability, the SOUL Race Exhaust represents the most aggressive rear exhaust option for the 987.2 platform.
Fits 2009–2012 Porsche 987.2 Boxster, Boxster S, Cayman, Cayman S, Boxster Spyder, and Cayman R
Compatible with 2.9L and 3.4L naturally aspirated flat-six engines
Includes fitment for the 3.4L Boxster Spyder and Cayman R
Available for both 6-speed Manual and PDK transmissions
Purpose-built for aggressive track use, reduced weight, durability, and maximum exhaust character
Free-flowing over-axle piping designed to maintain clearance around the axles and sway-bar end links
Designed to maintain clearance on lowered and heavily modified vehicles
Complete system weighs approximately 27 lbs / 12.2 kg
Factory exhaust components with mounting brackets weigh approximately 46 lbs / 20.9 kg
Saves approximately 19 lbs / 8.6 kg compared with the factory exhaust system
Bespoke SOUL mounting system saves more than 5 lbs compared with the factory exhaust mounts
Transmission-specific mounting architecture for Manual and PDK applications
Forward piping attaches to a dedicated transmission mounting brace using heavy-duty Mikalor band clamps
Rubber vibration dampeners provide additional support to the over-axle piping and help reduce stress caused by movement and vibration
Constructed from mandrel-bent .065-inch-wall T304L stainless steel tubing
Brackets are laser cut, press-brake formed, and TIG welded for increased durability
Exhaust welds are back-purged for improved strength and longevity under demanding operating conditions
Resonated design helps shape the exhaust note while maintaining an extremely aggressive overall sound
Designed primarily around track performance rather than maximum sound attenuation
Cabin drone will still be present
Compatible with factory Porsche headers and SOUL headers
Dimensional differences with some third-party aftermarket headers may create over-axle pipe clearance issues
Each exhaust is rigorously quality-checked and fixture-tested prior to shipment to help ensure accurate fitment
New high-grade hardware for the header-to-exhaust flanges included
Detailed installation instructions included
Includes SOUL Straight-Cut Single-Wall exhaust tips in Signature Satin
Alternate SOUL tip configurations are available by special request
Backed by SOUL Performance Products' Lifetime Warranty for both street and track use
Designed and manufactured in-house at SOUL Performance Products in Willow Grove, Pennsylvania
The SOUL Race Exhaust System was developed primarily for track performance rather than sound attenuation.
SOUL specifically describes the system as very loud and notes that cabin drone will remain present even with the resonators. Pairing the Race Exhaust with aftermarket headers will further increase overall exhaust volume and intensity.
SOUL does not recommend pairing the Race Exhaust with aftermarket headers for normal street use. Owners looking for a more refined exhaust system with the ability to significantly reduce volume when desired should consider the SOUL Valved Exhaust System instead.
The SOUL Race Exhaust is designed to fit vehicles equipped with the factory Porsche headers or compatible SOUL headers.
Because the over-axle piping is designed around specific chassis clearances, dimensional differences in some third-party aftermarket header systems may create fitment or clearance issues. Customers using non-SOUL aftermarket headers should confirm compatibility before ordering.
This DasMotoring listing includes SOUL Straight-Cut Single-Wall exhaust tips in Signature Satin.
To keep ordering simple, alternate tip configurations are not offered through the standard product options. If you would like a different SOUL tip configuration, contact DasMotoring before ordering and we can confirm availability and pricing.
This product is not CARB certified and may not be legal for use on emissions-controlled vehicles. SOUL identifies the system as intended for off-road use only.
Customers are responsible for ensuring compliance with all applicable local, state, and federal regulations before installation or use.
The SOUL Valved Exhaust System is designed for Porsche 987.2 Boxster and Cayman owners who want a dramatic increase in naturally aspirated flat-six sound while retaining the ability to quiet the car when desired. The system provides two distinctly different exhaust personalities, combining refined highway manners with a much more aggressive exhaust note at the press of a button.
With the valves closed, exhaust gases are routed through SOUL's high-quality mufflers to produce a refined, sporty sound while minimizing unwanted cabin drone. With factory headers installed, SOUL specifically developed the system to remain comfortable at highway speeds and quiet enough for normal neighborhood and everyday driving.
Open the valves and exhaust gases are allowed to flow through large 2.5-inch piping, substantially increasing volume and allowing more of the naturally aspirated flat-six character to come through. Perforations within the exhaust path keep the mufflers acoustically connected to the system even with the valves open, helping create a fuller and more robust tone rather than simply increasing overall volume.
SOUL developed the system on its own 987.2 Cayman S and tested it extensively on both street and track applications, including the Cayman R. The exhaust is also designed to pair well with aftermarket headers, allowing owners to build a more aggressive complete exhaust system while retaining the ability to reduce volume when desired.
The complete SOUL Valved Exhaust weighs approximately 30 lbs, compared with approximately 35 lbs for the factory exhaust components, saving approximately 5 lbs / 2.2 kg.
Fits 2009–2012 Porsche 987.2 Boxster, Boxster S, Cayman, Cayman S, Boxster Spyder, and Cayman R
Compatible with 2.9L and 3.4L naturally aspirated flat-six engines
Includes fitment for the 3.4L Boxster Spyder and Cayman R
Direct bolt-on replacement for the factory rear exhaust system
Dual-mode valved design provides distinctly different quiet and aggressive exhaust settings
With the valves closed, exhaust gases are routed through SOUL mufflers designed to minimize unwanted cabin drone
With factory headers installed, valves-closed operation is designed to provide comfortable highway cruising with no objectionable drone
With the valves open, exhaust gases flow through large 2.5-inch piping for substantially increased volume and naturally aspirated flat-six character
Features 2.5-inch OD over-axle piping
Mufflers remain acoustically connected to the exhaust path with the valves open, helping produce a fuller and more robust exhaust tone
Designed to work well with factory headers or upgraded aftermarket headers
SOUL valve controller kit included
Valve controller is required for vehicles without factory Porsche Sport Exhaust
Vehicles equipped with factory PSE can retain normal Porsche exhaust-valve functionality
Included valve controller can also provide direct manual valve override on PSE-equipped vehicles
Weighs approximately 30 lbs / 13.6 kg
Factory exhaust components weigh approximately 35 lbs / 15.9 kg
Saves approximately 5 lbs / 2.2 kg compared with the factory exhaust system
Constructed from mandrel-bent T304L stainless steel tubing
Mufflers feature fortified casings designed for long-term durability
High-quality sound-absorbing material is designed to withstand extended street and track use without deteriorating over time
Reinforced exhaust brackets help prevent cracking and fatigue during extended street and track use
Each exhaust is quality-checked and fixture-tested prior to shipment to help ensure accurate fitment
New high-grade hardware for the header-to-exhaust flanges included
Detailed installation instructions included
Includes SOUL Straight-Cut Single-Wall exhaust tips in Signature Satin
Alternate SOUL tip styles and finishes are available by special request
Backed by SOUL Performance Products' Lifetime Warranty for both street and track use
The SOUL Valved Exhaust includes a valve controller kit.
Vehicles without factory Porsche Sport Exhaust use the included controller to operate the exhaust valves.
Vehicles equipped with factory PSE can retain normal factory exhaust-valve operation. The included SOUL controller can also provide direct manual valve override, allowing the driver to open or close the exhaust valves independently of Porsche's factory valve strategy.
This gives the driver the flexibility to significantly reduce exhaust volume during highway cruising, neighborhood driving, or longer trips while retaining immediate access to the more aggressive valves-open exhaust mode.
With the valves closed and factory headers installed, the SOUL Valved Exhaust is designed to provide a refined and sporty exhaust note without objectionable highway drone.
Opening the valves dramatically changes the character of the system. Exhaust gases are allowed to flow through the large 2.5-inch path, substantially increasing volume and allowing more of the 987.2's naturally aspirated flat-six sound to reach the driver.
Pairing the system with aftermarket headers will further increase overall exhaust volume and character while the valved architecture retains the ability to reduce sound when desired.
SOUL developed the 987.2 Valved Exhaust using its own Cayman S and tested the system extensively in both street and track environments.
Dyno testing performed with the SOUL Valved Exhaust combined with SOUL Long Tube Street Headers demonstrated maximum gains of approximately 8 wheel horsepower and 11 lb-ft of torque at 4,100 RPM.
These results represent the combined exhaust configuration and should not be interpreted as gains from the Valved Exhaust alone. Actual performance will vary based on vehicle configuration, engine condition, fuel, environmental conditions, ECU calibration, and additional modifications.
This DasMotoring listing includes SOUL Straight-Cut Single-Wall exhaust tips in Signature Satin.
To keep ordering simple, alternate tip finishes and styles are not offered through the standard product options. If you would like a different SOUL tip configuration, contact DasMotoring before ordering and we can confirm availability and pricing.
SOUL also offers alternate stainless steel and titanium tip configurations by special request. Titanium single-wall tips can save nearly one pound compared with stainless steel tips.
The SOUL Valved Exhaust is particularly well suited for owners who want a more aggressive exhaust system without permanently committing to maximum volume.
The ability to switch between muffled and freer-flowing exhaust paths makes the system suitable for daily driving, long-distance cruising, spirited back-road driving, and track use while retaining substantially greater control over overall exhaust volume than a fixed non-valved system.
The SOUL Competition Headers are designed for Porsche 987.2 Boxster and Cayman owners looking to maximize exhaust flow, reduce weight, sharpen engine response, and significantly increase naturally aspirated flat-six sound. By replacing the heavy and restrictive factory header and catalytic converter assemblies with a purpose-built catless design, the Competition Headers remove one of the major restrictions in the factory exhaust system.
SOUL developed this application specifically for the 987.2 platform using 2-inch primary runners and appropriately sized collectors. The runner and collector geometry was optimized around the 3.4L engine while also producing meaningful gains on the 2.9L flat-six. Port-matched flanges, smooth-radius primary tubing, and performance-oriented collectors work together to create a freer-flowing exhaust path from the cylinder heads into the remainder of the exhaust system.
Dyno testing on SOUL's Cayman S PDK demonstrated maximum gains of approximately 9 wheel horsepower and 10 lb-ft of torque at 4,100 RPM when the Competition Headers were paired with the SOUL Valved Exhaust System. Actual results will vary depending on engine configuration, exhaust system, fuel, environmental conditions, ECU calibration, and supporting modifications.
Weight reduction is another significant benefit. The factory header assemblies weigh approximately 26 lbs, while the SOUL Competition Headers weigh approximately 19 lbs without hardware, removing approximately 7 lbs / 3.2 kg from the vehicle.
For owners prioritizing maximum exhaust flow, reduced weight, sharper response, and a substantially more aggressive flat-six exhaust note, the SOUL Competition Headers provide the most aggressive header configuration for the 987.2 platform.
Fits 2009–2012 Porsche 987.2 Boxster, Boxster S, Cayman, Cayman S, Boxster Spyder, and Cayman R
Compatible with 2.9L and 3.4L naturally aspirated flat-six engines
Includes fitment for the Boxster Spyder and Cayman R 3.4L models
SOUL specifies these headers for all 2009–2012 Porsche 987.2 Boxster and Cayman vehicles and specifically developed the header geometry to provide gains on both the 2.9L and 3.4L engines.
Complete catless replacement for the factory header and catalytic converter assemblies
Developed specifically for the Porsche 987.2 platform
Features 2-inch primary runners
Runner and collector sizing optimized around the 3.4L engine while also providing performance improvements for the 2.9L
Port-matched flanges provide a smooth transition from the cylinder head into the primary runners
Smooth-radius primary tubing helps minimize unnecessary exhaust restriction
Performance-oriented collectors optimize exhaust flow through the header assembly
Designed to improve engine response, power delivery, and naturally aspirated flat-six exhaust character
Dyno testing demonstrated maximum gains of approximately 9 whp and 10 lb-ft of torque at 4,100 RPM when paired with the SOUL Valved Exhaust System
Weighs approximately 19 lbs / 8.6 kg without hardware
Factory header assemblies weigh approximately 26 lbs / 11.8 kg
Saves approximately 7 lbs / 3.2 kg compared with the factory components
Removal of the factory catalytic converters reduces a significant source of exhaust restriction and heat
Constructed from precision-fabricated T304L stainless steel
Direct bolt-on installation
Each header set is rigorously quality-checked prior to shipment
Each set is fixture-tested to help ensure accurate fitment
New high-grade hardware for the header-to-exhaust flanges included
Detailed installation instructions included
Optional O2 sensor spacers available
Optional SOUL Copper Header Gasket Set available
Backed by SOUL Performance Products' Lifetime Warranty for both street and track use
The SOUL Competition Headers remove the factory catalytic converters and may trigger a check engine light as a result.
SOUL recommends an appropriate custom ECU calibration to address catalyst-related fault codes on vehicles equipped with these headers. ECU tuning may also allow the engine to better take advantage of the increased exhaust flow provided by the catless configuration.
Optional O2 sensor spacers can be added to the Competition Headers at the time of purchase.
O2 sensor spacers reposition the downstream oxygen sensors farther from the direct exhaust stream and may reduce the likelihood of catalyst-efficiency fault codes on some vehicles.
Results can vary depending on vehicle condition and ECU calibration, and DasMotoring does not guarantee that O2 spacers will prevent a check engine light.
The SOUL Competition Headers remove the catalytic converters entirely, providing a freer-flowing exhaust path, approximately 7 lbs of weight reduction, and a substantially more aggressive exhaust configuration.
The SOUL Long Tube Street Headers retain large-diameter, free-flowing catalytic converters while still improving runner geometry, exhaust flow, response, performance, and flat-six sound.
For owners prioritizing maximum flow, reduced weight, and sound—and who are prepared to address catalyst-related ECU faults—the Competition Headers provide the more aggressive configuration. For owners who want to retain catalytic converters and maintain a more street-oriented exhaust system, the Long Tube Street Headers provide the catted alternative.
A SOUL Copper Header Gasket Set can be added when installing the Competition Headers.
The gasket set replaces the old or worn factory gaskets at the header-to-cylinder-head and header-to-exhaust connections and is available as a $65 option.
SOUL specifies that its copper header gaskets should not be reused once installed.
The SOUL Competition Headers remove the factory catalytic converters and are not CARB certified. SOUL identifies this product as intended for off-road use only and notes that it may not be legal for use on emissions-controlled vehicles.
Customers are responsible for ensuring compliance with all applicable local, state, and federal regulations before installation or use.
The SOUL Long Tube Street Headers are designed for Porsche 987.2 Boxster and Cayman owners looking to improve exhaust flow, throttle response, performance, and naturally aspirated flat-six sound while retaining catalytic converters. Replacing the restrictive factory header assemblies with properly sized long-tube runners, optimized collectors, and large-diameter free-flowing catalytic converters creates a more efficient exhaust path without moving to a fully catless configuration.
SOUL developed this application specifically for the 987.2 platform using 2-inch primary runners. Runner and collector sizing was optimized around the 3.4L engine while also providing performance improvements for the 2.9L flat-six. Port-matched flanges, smooth-radius primary tubing, and performance-oriented collectors work together to improve exhaust flow from the cylinder heads through the remainder of the exhaust system.
SOUL reports maximum gains of approximately 8 wheel horsepower and 11 lb-ft of torque at 4,100 RPM when the headers are paired with the SOUL Valved Exhaust System and tested on a Cayman S. Actual results will vary depending on vehicle condition, transmission, fuel, environmental conditions, ECU calibration, and supporting modifications.
The SOUL Street Headers also reduce weight compared with the factory assemblies. The factory headers weigh approximately 26.25 lbs, while the SOUL headers weigh approximately 24.45 lbs, saving approximately 1.8 lbs.
For owners who want improved response, performance, and flat-six sound while retaining catalytic converters and avoiding the compromises of a fully catless exhaust system, the SOUL Long Tube Street Headers provide a strong street-oriented solution.
Fits 2009–2012 Porsche 987.2 Boxster, Boxster S, Cayman, Cayman S, Boxster Spyder, and Cayman R
Compatible with 2.9L and 3.4L naturally aspirated flat-six engines
Includes fitment for the higher-performance Boxster Spyder and Cayman R models where equipped with the 3.4L engine
SOUL specifies fitment for all 2009–2012 987.2 Boxster and Cayman vehicles and states that the header design produces gains on both the 2.9L and 3.4L engines.
Long-tube header architecture developed specifically for the Porsche 987.2 platform
Features 2-inch primary runners
Runner and collector sizing optimized around the 3.4L engine while also providing performance improvements for the 2.9L
Large-diameter, free-flowing catalytic converters retain a catted exhaust configuration
Designed to improve exhaust flow, throttle response, power delivery, and naturally aspirated flat-six sound
SOUL reports maximum gains of approximately 8 whp and 11 lb-ft of torque at 4,100 RPM when paired with its Valved Exhaust System
Designed by SOUL to provide increased performance without triggering a check engine light
Weighs approximately 24.45 lbs compared with approximately 26.25 lbs for the factory header assemblies
Saves approximately 1.8 lbs / 0.8 kg compared with the factory headers
Port-matched flanges provide a smooth transition from the cylinder head into the primary runners
Smooth-radius primary tubing helps minimize unnecessary exhaust restriction
Performance-oriented collectors optimize exhaust flow through the header assembly
Constructed from T304L stainless steel
Each header set is rigorously quality-checked in-house
Direct bolt-on installation
Each set is fixture-tested prior to shipment to help ensure accurate fitment
New high-grade hardware for the header-to-exhaust flanges included
Detailed installation instructions included
Optional SOUL copper header gasket set available
Backed by SOUL Performance Products' Lifetime Warranty for both street and track use
SOUL developed the 987.2 Long Tube Street Headers around 2-inch primary runners and appropriately sized collectors to improve exhaust flow from both the 2.9L and 3.4L engines.
Testing on a Cayman S equipped with the SOUL Valved Exhaust System demonstrated maximum gains of approximately 8 wheel horsepower and 11 lb-ft of torque at 4,100 RPM.
An ECU tune is not required for installation. Additional performance may be possible when the freer-flowing headers are combined with an appropriate ECU calibration and supporting modifications.
The SOUL Long Tube Street Headers retain catalytic converters and are specifically designed to provide increased exhaust flow and performance without triggering a check engine light.
As with any emissions-related component, vehicle condition, oxygen-sensor health, ECU calibration, and additional modifications can influence catalyst monitoring. DasMotoring does not guarantee that a check engine light can never occur.
The SOUL Long Tube Street Headers retain large-diameter, free-flowing catalytic converters while improving runner geometry, collector design, exhaust flow, throttle response, and flat-six sound.
The SOUL Competition Headers eliminate the catalytic converters entirely for a less restrictive exhaust path, reduced weight, and a more aggressive exhaust configuration.
For owners who want improved performance and exhaust character while retaining catalytic converters, the Long Tube Street Headers provide the more street-oriented solution. For vehicles built around a fully catless exhaust configuration, the Competition Headers provide the more aggressive alternative.
A SOUL Copper Header Gasket Set can be added for customers replacing old or worn factory gaskets during installation.
The 987.2 gasket kit includes four approximately 1 mm-thick copper gaskets:
(2) Header-to-Head gaskets
(2) Header-to-Exhaust gaskets
SOUL specifies that these copper gaskets should not be reused after installation. The complete gasket set is available as a $65 option.
These headers retain catalytic converters; however, the product is not CARB certified and may not be legal for use on emissions-controlled vehicles. SOUL identifies the product as intended for off-road use only.
Customers are responsible for ensuring compliance with all applicable local, state, and federal regulations before installation or use.
No results match your search. Try removing a few filters.
