Designed to fit:
Porsche 991.1 Carrera GTS
Porsche 991.2 Carrera S / GTS
Porsche 991.2 GT2 RS
Product description:
CARGRAPHIC Valve Control Unit to enhance functions of factory exhaust valve system
Consisting of:
CARGRAPHIC valve control unit
Wiring loom to connect with 2 vacuum exhaust valves
2x CARGRAPHIC remote controls
Export Version - Motorsport use only - No approval for use under road traffic regulations
Features:
Factory control remains connected
Easy connection and installation
Traceless deinstallation
Activation of factory valve control unit is always possible
High quality remote controls with CARGRAPHIC logo
How it works:
The CARGRAPHIC valve control unit is installed between the exhaust valves and the factory control unit. It takes over / overlays the control function of the standard control unit and operates with 3 modes:
SPORT mode: valves always open
COMFORT mode: valves always closed
AUTOMATIC mode: factory control is reactivated
PERFORMANCE - Made in Germany
Attention:
Permanent closing of the exhaust valves, especially under full power, can lead to engine damage.
Example pictures - Actual product may vary depending on model version.
Fitting notes:
Thanks to the original plug-and-play connectors, the valve control unit can be connected quickly. For safe and long-term operation, however, the control module & wiring must be mounted in a dry location, protected from heat and splashing water, and the wiring harness must be routed professionally. This requires sound knowledge of automotive electrics and the proper workshop equipment.
We therefore strongly recommend installation by a qualified specialist workshop. Self-installation may lead to malfunctions or vehicle damage and will void any warranty claims.
National and International Regulations and Requirements:
The CARGRAPHIC portfolio includes components that may be affected by national and international emissions regulations. CARGRAPHIC places great importance on providing accurate information about the compliance of our products with the respective regulations and clearly indicating whether they are approved exclusively for racetrack use or also for public road use. However, if there is no specific declaration regarding a product's intended use, CARGRAPHIC makes no assurance regarding its compliance. It is fundamentally the buyer's responsibility to select the appropriate product for the intended purpose and verify whether its use complies with local regulations and requirements. As regulations may change, we recommend regularly visiting our website to ensure the chosen product meets current legal requirements. Make sure that the product is installed according to the installation instructions and operated in compliance with all applicable local regulations.
Designed to fit:
Porsche 991.1 Carrera GTS
Porsche 991.2 Carrera S / GTS
Porsche 991.2 GT2 RS
Product description:
CARGRAPHIC performance 2-Mode Exhaust Valve Control Unit - Version for vacuum exhaust valves
Consisting of:
CARGRAPHIC performance exhaust valve control unit
Wiring set for connection to vacuum valves and Pierburg solenoid, first generation with square connector
Adapter wiring
2x CARGRAPHICremote controls
Export Version - Motorsport use only - No approval for use under road traffic regulations
Features:
Factory control function remains active
Connection using OEM plugs
Easy installation
Traceless removal
Full control of your exhaust valves
High quality remote controls with CARGRAPHIC logo
Programmable start mode - engine start with open or closed exhaust valves
How it works:
The CARGRAPHIC valve control unit is installed between the exhaust valves and the factory control unit. It takes over / overlays the control function of the standard control unit and operates with 2 modes:
SPORT mode: valves always open
AUTOMATIC mode: factory control is reactivated
PERFORMANCE - Made in Germany
Attention:
Example pictures - Actual product may vary depending on model version.
Fitting notes:
Thanks to the original plug-and-play connectors, the valve control unit can be connected quickly. For safe and long-term operation, however, the control module & wiring must be mounted in a dry location, protected from heat and splashing water, and the wiring harness must be routed professionally. This requires sound knowledge of automotive electrics and the proper workshop equipment.
No results match your search. Try removing a few filters.
